Power Pak Rubber Belts Pvt.ltd

Flat belts are designed for light-duty power transmission and high-performance conveying. They are best-suited for applications with smaller pulleys and large central distances. Flat belts can connect inside and outside pulleys and can come in both endless and jointed construction. They have a high power transmission efficiency, are cost effective, and are easy to use and install.

Construction

• Fabric ply belts consist of several plies or layers that are made of cotton or synthetic fiber, with or without rubber impregnated. The number of plies determines the belt thickness that will help determine the minimum pulley diameter for the drive.
• Fabric cord belts are constructed with multiple cords made from cotton or synthetic fibers such as rayon, nylon, plastic, or Kevlar. They are encased in rubber and covered with a fabric/runner covering. This type is generally classed as a heavy-duty flat belt, used for high speeds, small pulley diameters, and shock loads. Steel cables can also be used as they have higher capacity and lower stretch than fabric cord flat belts.
• Flat belts generally have a traction layer made of oriented polyamide with two covers of elastomer leather or textile material and one intermediate layer of fabric on each side. The traction layer absorbs the forces exerted on the belt when power is transmitted. The friction cover ensures that the peripheral force acting on the belt pulleys is transmitted to the belt and vice-versa.

Applications

• The power transmission flat belt can be used in many forms of power transmission. It is known as a two pulley drive, consisting of a driving pulley, a driven pulley, and the belt. Below are examples of pulley design variations.
• Flat belts may be customized for a wide range of applications. Such configurations include an incline to carry product to another level. Flat belts may also have a tracking sleeve under the system to ensure that the belt does not slip, or that the coefficient of friction can be adjusted to prevent slippage.
• Typical applications include conveyors, compressor, machine tools, and other heavy industrial equipment.

MATRIX is a leading manufacturer of Matrix Construction Equipment Fan Belts for earthmoving, construction and mining equipment.

We manufacture a competitive range of “Matrix Construction Equipment Fan Belts” for all kinds of dozers, dumpers, excavators, wheel loaders, shovels, crane, motor graders, Backhoe loaders, etc. and other construction and earth moving equipment, which are widely accepted for their long life properties.

 

Our products are used in automobile industries for earthmovers, tractors and trucks and are made with high quality standards. Thus, these products are available in different specifications, sizes and dimensions in the market and are checked using strict quality control system at every stage of production.

•  The belts are manufactured with heavy duty Polyester Cord and Cotton Canvas to give maximum strength, non-elongation.

• Special compounds are being used for abrasion resistance and heat resistance.

• Matrix® Construction equipment belts are specially designed to meet the needs of requirements of earthmovers as the earthmovers have heavy jerk loads.

• More than 200 part numbers are available specifically for construction equipment vehicles.

• Special intermediate part numbers can also be produced as per the specification of the customer on special demand. 

Inferable from flawlessness and quality situated methodology, we have cut specialty in the business by offering a tremendous evaluation exhibit of Exercise Bike Poly-V Belts &Treadmill Belts for Gym. The offered belts are made utilizing best grade crude material and most recent innovation by our deft experts. To guarantee quality, these belts are entirely tried on different parameters. Mostly used to introduce in exercise/fitness bikes, treadmills and joggers, customers can benefit these belts from us in various determinations, according to their necessities.

Features:
• Low elongation and contraction
• Superior adhesion levels
• Linear strength 

Matrix Fitness Machinery Belts can be offered to you as per your size and dimensions. Our quality is at par with international standards. Our Fitness belts are “Truly endless (no joints)” & have high anti-static property, low noise & very high wear resistance which ensures longer working life.

Additional Information:

• Production Capacity: Upto 50,000 pieces per month
• Delivery Time: 5-7 working days

We are specialized in manufacturing and exporting a wide range of Matrix Genset Belts for all kinds of Generator Engines & Alternators to our clients across the globe. We have one of the biggest range of Poly V Belts, Cogged Belts Etc. suitable for all kinds of generators. 

These are widely demanded in the markets for their quality, optimum performance, durability and efficiency. These are made using premium quality materials that are produced as per the OEM standards. Our range is accessed by our clients at affordable prices in the market.

Enriched with vast industry experience, we have been able to manufacture, supply, export, wholesale, retail Generator Engine Belts. Our offered generator belts are manufactured with the aid of modern machinery and cutting-edge technology that is installed at our premises. Further, without making compromise with the quality of the products, we have mustered huge client-base.

We are offering a wide range of Matrix Double Poly V-Belt to our clients.

Optimax Prime Flour Mill Belts are ISI certified belts and remain the most widely used power transmission belts. They are proven to offer dependable service with minimum maintenance in a variety of medium and heavy duty industrial drives such as textile industry, agricultural industry, industrial applications etc. 

OPTIMAX Prime Classic v-belts are just that, classic in design and application. The classic v-belt is the most tried and true style of v-belt in the market. Originally designed to replace leather belts in a variety of industries including agriculture, textile industry, automotive, facility maintenance etc. Also known as light duty v-belts, they are designed with a 40° angle to "wedge" the belt into the groove of the pulley. The greater the load, the greater the wedging action. The manufacturing process combines a rubber compound with a polyester cord to increase strength and stability. Wrapped type belts are manufactured in Z(M), A, B, C, D, SPA,SPB,SPC,and FHP sections as standard.

 

Aplication

• All industrial applications including V-Flat Drives

• Due to it’s composite multipurpose construction these belts resist oils, heat, ozone, sunlight, weather and aging. Hence can be used in all open drives.

Note: NR – Natural Rubber, CR – Chloroprene Rubber

 

Features

• Designed specially for reverse-bend drive by positioning tensile members closer to the bottom compare to that of conventional multiple V-belts A, B, & C.

• Particularly suitable to Agricultural & Industrial Machinery, where V belts are often driven with tension idler pulley on their back.

• Safe use is ensured by preventing static electricity.

• Cover bends provides support to the tensile cord and full contact with the sheave groove for uniform loading, uniform wear and thus increased belt life.

• Heat, Oil and Anti-Static resistant

• Outer cover fabric enhances durability by protecting inner parts.

• Specially designed cords enhance durability & length stability.

Our Matrix Caterpillar And Puller Belts, which are used in the production and processing of cables, are manufactured of high-quality materials since they are mainly used at high speeds and under considerable pressure.

Matrix® Line has a wide range of puller/caterpillar belts produced on either a flat or poly-V belt base depending on customer requirements. These belts exhibit superior performance and operating life due to exceptionally low wear features.  In order to ensure a long service life and good performance, it is important that this material meets some application requirements. The coated continuous polyester and/or aramid fabric construction of Matrix® Caterpillar belts allow the application of high pulling forces. Special bottom covers absorb high pressure loads and ensure low rolling resistance. Different top covers can be selected to combine optimum grip and wear resistance for every type of cable.

The absence of a splice, together with tight tolerances in belt thickness and suppleness, allows for constant speed of work. Our range of belts is available in a wide range of wear resistant covers, smooth or with grooves on both top and bottom sides. Matrix® belts are always manufactured in pairs ensuring constant cable quality.

Customer Benefits:

• Constant cable quality
• High cable pressures allowed
• All types of cables (covered, non-covered, twisted)
• Cable friction can be increased by machining custom-made top grooves
• Tracking can be optimized by adding longitudinal bottom grooves (custom made or standard Poly-V, J, K, L,)
• No fluctuations in cable insulation quality
• Uniform cable production speed

Caterpillar Belts are used in Cable and PVC Pipe Industries 

• The belts are manufactured with heavy duty Polyester Cord and Cotton Canvas to give maximum strength, non-elongation

• Special compounds are being used for abrasion resistance and heat resistance

• In order to avoid the slippage of Pipes or Cable, a special design is made on top of the belt

• We also manufacture special application Cable Extruder Belts as per customer's drawing and specifications

Power loom  V-belts are ISI certified belts and remain the most widely used power transmission belts. They are proven to offer dependable service with minimum maintenance in a variety of medium and heavy duty industrial drives such as textile industry, agricultural industry, industrial applications etc. 

OPTIMAX Prime Classic v-belts are just that, classic in design and application. The classic v-belt is the most tried and true style of v-belt in the market. Originally designed to replace leather belts in a variety of industries including agriculture, textile industry, automotive, facility maintenance etc. Also known as light duty v-belts, they are designed with a 40° angle to "wedge" the belt into the groove of the pulley. The greater the load, the greater the wedging action. The manufacturing process combines a rubber compound with a polyester cord to increase strength and stability. Wrapped type belts are manufactured in Z(M), A, B, C, D, SPA,SPB,SPC,and FHP sections as standard.

Application
All industrial applications including V-Flat Drives
Due to it’s composite multipurpose construction these belts resist oils, heat, ozone, sunlight, weather and aging. Hence can be used in all open drives.
Construction
Functions
Materials
1Cover fabric
Protects the inner parts of the belt from strong abrasion on the pulley groove and protects the core of the belt from oil, dirt and heat.
Cotton / Synthetic fabric
2Tension member
Strongly Bonded to the body for best result in equal load distribution. Also helps in precluding bending stress.
Polyester, Aramid
3Top compression rubber
Top compression rubber Maintains belt shape (upper)
NR, CR
4Adhesive rubber
Supports and protects tension member adhesion
NR, CR
5Bottom compression rubber
Maintains belt shape (lower)
NR, CR

Features
Designed specially for reverse-bend drive by positioning tensile members closer to the bottom compare to that of conventional multiple V-belts A, B, & C.
Particularly suitable to Agricultural & Industrial Machinery, where V belts are often driven with tension idler pulley on their back.
Safe use is ensured by preventing static electricity.
Cover bends provides support to the tensile cord and full contact with the sheave groove for uniform loading, uniform wear and thus increased belt life.
Heat, Oil and Anti-Static resistant
Outer cover fabric enhances durability by protecting inner parts.
Specially designed cords enhance durability & length stability