Call 08048974668 79% Response Rate

our range

Industrial Belts

Offering you a complete choice of products which include matrix raw edge laminated belts, matrix banded cogged and raw edge banded belts, optimax prime wedge wrapped v belt, matrix classical transmission v belts, matrix industrial cogged belts and classical v belts.
  • Matrix Raw Edge Laminated Belts
  • Matrix Raw Edge Laminated Belts
  • Matrix Raw Edge Laminated Belts
Matrix Raw Edge Laminated Belts

Matrix Raw Edge Laminated Belts

Rs 100  / PieceGet Best Price

Product Brochure

TypeREL 10A
Angle40 Degree
Outside Circumference2600 mm
MaterialPolychloroprene Rubber
Top Width9.7 mm
BrandMatrix
Country of OriginMade in India
Height7.5 mm
Belt Length in mm500 mm

Matrix Raw Edge Laminated Belts are designed for drives requiring tough, high speed applications with increased horsepower capacity and greater flexibility. Its use is especially suitable in the more demanding automotive power transmission needs. “Laminated with multiple fabrics in the bottom to reduce noise”


Application:
  • Automotive Industries(IC Engine , Cooling Pump, water Pump, Compressor, Alternator).
  • General Engineering Industries.
  • Agriculture Industries.


Features:

A. Top & Bottom Fabric

The cover fabric is woven with highly twisted, shear resistant, warp and weft fibers for increased flexibility and abrasion resistance. It is also rubber coated for resistance to oil & static build-up.

 

B. Adhesion Rubber

The adhesion rubber is formulated for maximum adhesion between the tensile cord, fabric cover and compression rubber to prevent separation of the belt components.

 

C. Tensile Cord

The tensile cord is the power transmission element within the belt. Cords are wound around the belt in an uninterrupted spiral for enhanced tensile strength. The cords are twisted in various configurations to match the load application and pre-stretched prior to belt assembly for length stabilization and minimum stretch during use.

 

D. Compression Rubber

The compression rubber in Matrix raw edge Laminated v-belts is reinforced with short fibers oriented across the belt width. This ensures dimensional stability of the cross section and provides maximum support for the tensile cords. This compound ensures a better resistance to wear than standard wrapped v-belts.

View Complete details

get quote request a call back
  • Matrix Banded Cogged And Raw Edge Banded Belts
  • Matrix Banded Cogged And Raw Edge Banded Belts
Matrix Banded Cogged And Raw Edge Banded Belts

Matrix Banded Cogged And Raw Edge Banded Belts

Rs 100  / PieceGet Best Price

Product Brochure

SectionHAX
BrandMatrix
Angle36 Degree
ColorBlack
MaterialPolychloroprene Rubber
Temperature Range-25 to +100 Deg C
Tw (mm)13 mm
Thickness10 mm
Pitch (mm)15.9 mm
Manufacturing Range Min (inch/mm)23.5 / 597
Manufacturing Range Max (inch/mm)100 / 2540

Application

MATRIX Banded Belts combines the longer life and superior performance of the Cog-Belt with the stability of banded construction& Banded belts are also ideal for heavy industrial power transmission applications with vertical running shafts and large center distances.It can withstand impact loads, Oil and heat resistant, static dissipatingetc are some of its exclusive features. Molded cogged construction, cushion compound cord layer, and fiber core give it superior performance and durability characteristics.


MATRIX Banded V Belts

  • Enhanced power transmission capacity
  • No lateral whip, twist, spin or jump-off
  • Lesser number of Belts required as compared to multiple single-Belt drive
  • High adhesion strength between tie-band and the belts
  • Eliminates changes of mismatch in length (Permanent Matched Set)
  • Molded Cogs
  • Improved heat dissipation
  • Greater flexibility for smaller diameter pulleys
  • Transmits higher horsepower
  • Anti-static, oil and heat resistant
  • Enhanced power transmission capacity up to 25%
  • ch in length as observed in multiple single-Belt drive
  • Antistatic, oil and heat resistant
  • ATEX certified FRAS Belts are also available
  • Manufactured through a single-stage-curing process

View Complete details

get quote request a call back
Optimax Prime Wedge Wrapped V Belt

Optimax Prime Wedge Wrapped V Belt

Rs 100  / PieceGet Best Price

Product Brochure

SectionSPZ Section
BrandOptimax Prime
Angle40 Degree
MaterialPolychloroprene Rubber
Heat ResistanceYes
Oil ResistanceYes
StandardBS 3790
Tw (mm)10 mm
Thickness8 mm
Pitch Width85 mm
Top To Pitch Height2 mm
Diameter63 mm
Lp to La3 mm
Li To Lp37 mm
Li To La50 mm
Manufacturing Range Min (inch/mm)365 mm
Manufacturing Range Max (inch/mm)4953 mm

Optimax Prime Wedge Wrapped V Belt 

Applications

  • Suitable for all industrial applications, particularly where space, weight and horse power capacity are critical. Due to it’s moulded teeth this belt is well suited for drives with smaller diameter sheaves.

   

Construction

Functions

Materials

1 Top fabric

Protects internal tension member

Cotton / Synthetic fabric

2 Tension member

Primary material for transferring power

Polyester, Aramid

3 Compression rubber

Maintains sectional shape by side pressure

Fiber loaded CR

4 Bottom rubber

Absorbs shock and prevents cracking on compression rubber

NR, CR



Features: 
  • Designed to enhance power transmission efficiency by providing even stress over tension member with a special sectional shape of narrower top width and taller height, special raw materials and production technique.
  • Length stability. A matched set of Matrix Narrow V-Belts for multiple belt drives retains superior uniformity under tension. A Matrix matched set also remains perfectly matched even after long periods of storage.
  • Compared with conventional V-belts, Matrix Narrow V-Belts are thicker and realize high loads
  • Specially designed cords enhance durability and length stability.
  • Excellent in resistance against heat, oil and wear.
  • Safe use is ensured by preventing static electricity.
  • Enhances power transmission efficiency by reducing slip.
  • Due to it’s ‘narrow’ cross-sections, these belts can transmit upto three times the horse power of the classical wrapped typed belts, in the same amount of drive space

View Complete details

get quote request a call back
Matrix Classical Transmission V Belts

Matrix Classical Transmission V Belts

Rs 100  / PieceGet Best Price

Product Brochure

BrandMatrix
MaterialPolychloroprene Rubber
Angle40 Degree
SectionA
ColorBlack
Country of OriginMade in India
Packaging TypeBox
Tw (mm)13 mm
Thickness8 mm
Belt Weight (kg/m)0.109
Manufacturing Range Min (inch/mm)18 / 457
Manufacturing Range Max (inch/mm)180 / 4572

Matrix Classical Transmission V Belts
Matrix Classical Transmission V Belts are ISI certified belts and remain the most widely used power transmission belts. They are proven to offer dependable service with minimum maintenance in a variety of heavy duty industrial drives such as textile industry, agricultural industry, industrial applications etc. 

MATRIX Classic v-belts are just that, classic in design and application. The classic v-belt is the most tried and true style of v-belt in the market. Originally designed to replace leather belts in a variety of industries including agriculture, textile industry, automotive, facility maintenance etc. Also known as light duty v-belts, they are designed with a 40° angle to "wedge" the belt into the groove of the pulley. The greater the load, the greater the wedging action. The manufacturing process combines a rubber compound with a polyester cord to increase strength and stability. Wrapped type belts are manufactured in Z(M), A, B, C, D, SPA,SPB,SPC,and FHP sections as standard.


Aplication

  • All industrial applications including V-Flat Drives

  • Due to it’s composite multipurpose construction these belts resist oils, heat, ozone, sunlight, weather and aging. Hence can be used in all open drives.

Construction

Functions

Materials

1Cover fabric

Protects the inner parts of the belt from strong abrasion on the pulley groove and protects the core of the belt from oil, dirt and heat.

Cotton / Synthetic fabric

2Tension member

Strongly Bonded to the body for best result in equal load distribution. Also helps in precluding bending stress.

Polyester, Aramid

3Top compression rubber

Top compression rubber Maintains belt shape (upper)

NR, CR

4Adhesive rubber

Supports and protects tension member adhesion

NR, CR

5Bottom compression rubber

Maintains belt shape (lower)

NR, CR


Note: NR – Natural Rubber, CR – Chloroprene Rubber

 

Features

  • Designed specially for reverse-bend drive by positioning tensile members closer to the bottom compare to that of conventional multiple V-belts A, B, & C.

  • Particularly suitable to Agricultural & Industrial Machinery, where V belts are often driven with tension idler pulley on their back.

  • Safe use is ensured by preventing static electricity.

  • Cover bends provides support to the tensile cord and full contact with the sheave groove for uniform loading, uniform wear and thus increased belt life.

  • Heat, Oil and Anti-Static resistant

  • Outer cover fabric enhances durability by protecting inner parts.

  • Specially designed cords enhance durability & length stability. 

View Complete details

get quote request a call back
Matrix Industrial Cogged Belts

Matrix Industrial Cogged Belts

Rs 100  / PieceGet Best Price

Product Brochure

BrandMatrix
MaterialPolychloroprene Rubber
Angle36 Degree
SectionZX
ColorBlack
Usage/ApplicationIndustrial Use
Heat ResistanceYes
Tw (mm)10 mm
Thickness6 mm
StandardIS 2494, BS 3790, ISO 4184
Manufacturing Range Min (inch/mm)23.5 / 597
Manufacturing Range Max (inch/mm)100 / 2540

Applications

  • Suitable for all industrial applications, particularly where space, weight and horse power capacity are critical. Due to it’s moulded teeth this belt is well suited for drives with smaller diameter sheaves.

   

 

Construction

Functions

Materials

1 Top fabric

Protects internal tension member

Cotton / Synthetic fabric

2 Tension member

Primary material for transferring power

Polyester, Aramid

3 Compression rubber

Maintains sectional shape by side pressure

Fiber loaded CR

4 Bottom rubber

Absorbs shock and prevents cracking on compression rubber

NR, CR



Features
  • Excellent durability and flexibility in driving. 
  • Specially designed cords enhance durability and length stability
  • Excellent in resistance against heat, oil and wear.
  • High power transmission efficiency. 
  • Can be used on small pulleys.

View Complete details

get quote request a call back
Classical V Belts

Classical V Belts

Rs 100  / PieceGet Best Price

Product Brochure

BrandOptimax Prime
TypeV-Belts
Angle40 Degree
SectionZ
ColorBlack
MaterialPolychloroprene Rubber
Usage/ApplicationIndustry, Agriculture, Textile, Flour Mills, Etc.
Temperature Range-20 to 80 degree C
Heat ResistanceYes
StandardISO 9001 2008, ISI Certified
Tw (mm)10 mm
Thickness6 mm
Belt Weight (kg/m)0.042
Manufacturing Range Min (inch/mm)39 / 990
Manufacturing Range Max (inch/mm)174 / 4420

Classical V-belts are ISI certified belts and remain the most widely used power transmission belts. They are proven to offer dependable service with minimum maintenance in a variety of medium and heavy duty industrial drives such as textile industry, agricultural industry, industrial applications etc. 


OPTIMAX Prime Classic v-belts are just that, classic in design and application. The classic v-belt is the most tried and true style of v-belt in the market. Originally designed to replace leather belts in a variety of industries including agriculture, textile industry, automotive, facility maintenance etc. Also known as light duty v-belts, they are designed with a 40° angle to "wedge" the belt into the groove of the pulley. The greater the load, the greater the wedging action. The manufacturing process combines a rubber compound with a polyester cord to increase strength and stability. Wrapped type belts are manufactured in Z(M), A, B, C, D, SPA,SPB,SPC,and FHP sections as standard.

Application

  • All industrial applications including V-Flat Drives

  • Due to it’s composite multipurpose construction these belts resist oils, heat, ozone, sunlight, weather and aging. Hence can be used in all open drives.

Construction

Functions

Materials

1Cover fabric

Protects the inner parts of the belt from strong abrasion on the pulley groove and protects the core of the belt from oil, dirt and heat.

Cotton / Synthetic fabric

2Tension member

Strongly Bonded to the body for best result in equal load distribution. Also helps in precluding bending stress.

Polyester, Aramid

3Top compression rubber

Top compression rubber Maintains belt shape (upper)

NR, CR

4Adhesive rubber

Supports and protects tension member adhesion

NR, CR

5Bottom compression rubber

Maintains belt shape (lower)

NR, CR


Features

  • Designed specially for reverse-bend drive by positioning tensile members closer to the bottom compare to that of conventional multiple V-belts A, B, & C.

  • Particularly suitable to Agricultural & Industrial Machinery, where V belts are often driven with tension idler pulley on their back.

  • Safe use is ensured by preventing static electricity.

  • Cover bends provides support to the tensile cord and full contact with the sheave groove for uniform loading, uniform wear and thus increased belt life.

  • Heat, Oil and Anti-Static resistant

  • Outer cover fabric enhances durability by protecting inner parts.

  • Specially designed cords enhance durability & length stability

View Complete details

get quote request a call back
Matrix Industrial Poly V And Multi Ribbed Belts

Matrix Industrial Poly V And Multi Ribbed Belts

Rs 100  / PieceGet Best Price

Product Brochure

BrandMatrix
MaterialPolychloroprene Rubber
ColorBlack
Packaging TypeBox
Usage/ApplicationIndustrial, Treadmill, Bikes, etc
Country of OriginMade in India
SectionPK
Thickness4.5 mm
Rib Pitch 'p' (mm)3.56 mm
No. of Ribs128
Manufacturing Range Min (inch/mm)280 mm
Manufacturing Range Max (inch/mm)2600 mm

Matrix Industrial Poly V And Multi Ribbed Belts have wide top width and thin thickness, providing consistent tension while driving by connecting in each rib. Poly Rib Belts incorporate the benefits of flat transmission belts and banded V-Belts with small bending stress and low stress loss, high transmission efficiency.


Applications
  • Used for multiple shaft large power high speed systems. Poly Rib belts are divided into industrial and automotive applications. Poly Rib Belts with PJ & PL models are used in industrial applications and the PK model is used in automotive engines.
  • Also well suited for applications such as appliances, out-door power equipment, roller conveyor, machine tools, medical equipment and exercise equipment.

Features:
  • Designed specially for reverse-bend drive by positioning tensile members closer to the bottom compare to that of conventional multiple V-belts A, B, & C.
  • Particularly suitable to Agricultural & Industrial Machinery, where V belts are often driven with tension idler pulley on their back.
  • Safe use is ensured by preventing static electricity.
  • Cover bends provides support to the tensile cord and full contact with the sheave groove for uniform loading, uniform wear and thus increased belt life.
  • Heat, Oil and Anti-Static resistant
  • Outer cover fabric enhances durability by protecting inner parts.
  • Specially designed cords enhance durability & length stability.

View Complete details

get quote request a call back
  • Poly V-Belt
  • Poly V-Belt
Poly V-Belt

Poly V-Belt

Rs 100  / pieceGet Best Price

Product Brochure

BrandMatrix
SectionPK
MaterialPolychloroprene Rubber
Usage/ApplicationCars, Trucks, Buses, Construction Equipment, Tractors, Earth Movers, Etc
No. Of Ribs128
Heat ResistanceYes
Country of OriginMade in India
Packaging TypeBox
Thickness4.5 mm
Rib Pitch 'p' (mm)3.56 mm
Manufacturing Range Min (inch/mm)280 mm
Manufacturing Range Max (inch/mm)2600 mm

Matrix Automotive Poly V-Belt
Matrix ribbed belts are endless rubber or polyurethane belts with longitudinal V shaped grooves. They transmit the motor power by friction from the driver to the driven side of the machine.


Poly V belt provide high flexibility and great power performance as they combine the benefits of flat and V belts.


Due to the use of high quality components and the variety of belt cross sectional, Matrix Poly V belt can be used in a wide variety of drive applications.

Ribbed/ Poly V belt V-ribbed belts, also termed as Poly V-belts, can be described as flat cord - reinforced transmission belts with lengthwise running triangular-shaped ribs with a top angle of 40°.


This construction leads to good support for all chords in the reinforcement and therefore an even load distribution is achieved.


Applications
  • Used for multiple shaft large power high speed systems. Matrix Poly Rib Belts with the PK model is used in automotive engines.
  • Also well suited for applications in Cars, buses, Heavy Duty Trucks, Earthmovers, Etc.

Features:
  • Designed specially for reverse-bend drive by positioning tensile members closer to the bottom compare to that of conventional multiple V-belts A, B, & C.
  • Particularly suitable to Agricultural & Industrial Machinery, where V belts are often driven with tension idler pulley on their back.
  • Safe use is ensured by preventing static electricity.
  • Cover bends provides support to the tensile cord and full contact with the sheave groove for uniform loading, uniform wear and thus increased belt life.
  • Heat, Oil and Anti-Static resistant
  • Outer cover fabric enhances durability by protecting inner parts.
  • Specially designed cords enhance durability & length stability.

S No. Construction Function Materials
1 Top fabric Protects internal tension member  Cotton / Synthetic fabric
2 Adhesion rubber  Supports and protects adhesiveness of tension member CR, EPDM
3 Tension Member  Primary material for transferring power Polyester, Nylon
4 Compression rubber Maintains belt shape and enhances side pressure CR, EPDM

View Complete details

get quote request a call back
Automotive Belt

Automotive Belt

Rs 149  / PieceGet Best Price

Product Brochure

BrandMatrix
MaterialPolychloroprene Rubber
Angle36 Degree
SectionBx
Country of OriginMade in India
Packaging TypeBox
Top Width (mm)16.7 mm
Thickness11 mm
Range Min(mm)600 mm
Range Max(mm)2540 mm

 Automotive Raw Edge Cogged Belts


Applications

  • Suitable for all industrial applications, particularly where space, weight and horse power capacity are critical. Due to it’s moulded teeth this belt is well suited for drives with smaller diameter sheaves.

   

Features:

  • Highly flexible and thus suitable for conditions requiring high flexibility and a small pulley diameter.
  • Assures uniform performance over the entire belt length for the entire belt life.
  • Excellent in resistance against heat, oil and water
  • Resistant to heat, oil and abrasion‌

 

Construction

Functions

Materials

1 Top fabric

Protects internal tension member

Cotton / Synthetic fabric

2 Tension member

Primary material for transferring power

Polyester, Aramid

3 Compression rubber

Maintains sectional shape by side pressure

Fiber loaded CR

4 Bottom rubber

Absorbs shock and prevents cracking on compression rubber

NR, CR



Section Top Width(mm) Thickness(mm) Angle (Deg) Range Min(mm) Range Max(mm)
X9.5 / AVX10 10 8 36 600 2540
X12.5 / AVX13 13 10 36 600 2540
Ax 127 8.5 36 600 2540
X10A 10.5 8 36 600 2540
X11A 11.5 8 36 600 2540
X13A 13.5 9 36 600 2540
X15A 17 10.5 36 600 2540
X17A 18.5 11 36 600 2540
X20A 21.5 12.5 36 600 2540

View Complete details

get quote request a call back
Matrix Variable Speed Belt

Matrix Variable Speed Belt

Rs 100  / PieceGet Best Price

Product Brochure

BrandMatrix
MaterialPolychloroprene Rubber
Country of OriginMade in India
Packaging TypeBox
Width13"
Height6"
Inside Length467 mm

Matrix Variable Speed Belt are specified for applications where changes in speed during operation are common. Part of the V-belt family, it differs in shape considerably to the standard v-belt - having a distinctly broader width and a narrower thickness.The cord, the power transmitting element has been designed for heavy power transmission while at the same time ensuring a very high degree of length stability. The mould cog ensures maximum flexibility and optimum fit in the pulley grooves.


Like the cogged raw edge v-belt, the Variable Speed Belt has cogs or notches on the underside of the belt allowing for a superior range of speed ratios than standard v-belts.A special rubber compound with textile fibres oriented across the length of the belt provides high stability and minimizes deflection in the transverse direction


Applications
  • Variable Speed Belts are used on machinery with infinitely variable drive ratios including:
  • Agricultural machinery (particularly combines harvesters)
  • Industrial machinery

 

Features & Benefits of a Variable Speed Belt

Industrial variable speed belts have simple structure belts, smooth transmission, small mechanical vibration, easy maintenance and are capable of continuously variable transmission.

  • Used in applications with speed changes during operation
  • Cords specially treated to resist stretch and carry high horse power requirements
  • Cog design provide flexibility to reduce heat buid-up and minimize cracking
  • Wide spread ranges and maximum belt life
  • High power transmission
  • Low heat build-up
  • Flexible
  • Extended belt life

 

Width / Height

Inside length (mm)

13/6

467-1252

17/6 (W16)

452-1202

21/6 (W 20)

532-972

22/8

500-1800

24/8

600-2160

26/8 (W25)

522-1600

28/8

505-2005

30/10

617-1800

32/10 (W 31,5)

709-1652

37/10

647-2497

42/12 (W 40)

1000-2000

47/12

905-2805

52/16 (W 50)

1180-3074

55/16

1180-2800

65/ 20 (W 65)

1506-3056

70/18

1500-3147

83/23 (W 80)

1691-3041

 

View Complete details

get quote request a call back
Matrix Fitness Machinery Belts

Matrix Fitness Machinery Belts

Rs 1,000  / PackGet Best Price

Product Brochure

Outside Circumference100 inches
Usage/ApplicationFitness Machinery
Angle38 degree
MaterialPolychloroprene Rubber
ColorBlack
Belt Length100 Inches
BrandMatrix
Country of OriginMade in India
Packaging TypeBox
Model Number440J

Inferable from flawlessness and quality situated methodology, we have cut specialty in the business by offering a tremendous evaluation exhibit of Exercise Bike Poly-V Belts &Treadmill Belts for Gym. The offered belts are made utilizing best grade crude material and most recent innovation by our deft experts. To guarantee quality, these belts are entirely tried on different parameters. Mostly used to introduce in exercise/fitness bikes, treadmills and joggers, customers can benefit these belts from us in various determinations, according to their necessities.

Features:
• Low elongation and contraction
• Superior adhesion levels
• Linear strength 


Matrix Fitness Machinery Belts can be offered to you as per your size and dimensions. Our quality is at par with international standards. Our Fitness belts are “Truly endless (no joints)” & have high anti-static property, low noise & very high wear resistance which ensures longer working life.



Additional Information:

  • Production Capacity: Upto 50,000 pieces per month
  • Delivery Time: 5-7 working days

View Complete details

get quote request a call back
Rubber V Belt

Rubber V Belt

Rs 100  / PieceGet Best Price
Country of OriginMade in India

View Complete details

get quote request a call back

EXPLORE MORE CATEGORIES